Charlotte Pipe Pvc 00801 0600HA Street Closet Flange 4x3

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 00801 0600HA is a 4-inch by 3-inch street closet flange designed for residential and light commercial drain, waste, and vent (DWV) plumbing systems. This pop-top spigot flange solvent welds directly into a 3-inch Schedule 40 fitting hub, eliminating the need for an additional coupling and reducing the stack height at the floor. Constructed in white PVC, it provides a corrosion-resistant, durable connection point for toilet installations. Licensed plumbers and experienced plumbing contractors are the typical installers of this fitting.

This street closet flange is suited for new construction and retrofit applications where the drain pipe terminates at or slightly above the finished floor level. The spigot end slides directly into an existing 3-inch Schedule 40 hub, making it a practical choice in tight rough-in situations. The pop-top center disc can be removed after installation to allow the toilet horn to seal against the wax ring. Package quantity is 25 units per case, making this well-suited for multi-unit or production plumbing jobs.

Key Features

• Spigot end solvent welds directly into 3-inch Schedule 40 fitting hub — no extra coupling needed
• Pop-top center disc keeps the flange bore protected until the toilet is set
• White PVC construction resists corrosion and chemical degradation in DWV service
• 4-inch top ring accepts standard toilet bolt slots and wax ring seating
• Reduces stack height compared to standard closet flanges requiring a separate adapter
• Sold in a case of 25 units for production and multi-unit job efficiency

Compatibility

Designed as an OEM-style replacement and new-installation fitting compatible with 3-inch Schedule 40 PVC DWV hub fittings using standard solvent weld (ASTM D2564) cement.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Shut off the water supply and ensure the drain line is clear before solvent welding the spigot end into the Schedule 40 hub — use an appropriate PVC primer and cement rated for DWV service. Allow full cure time per the cement manufacturer's instructions before setting the toilet. Do not apply force to the flange ring during the cure period.