Charlotte Pipe Pvc 00601 1000HA Dwv Reducing Wye

Product Description

The Charlotte Pipe PVC 00601 1000HA is a Schedule 40 PVC reducing wye fitting designed for drain, waste, and vent (DWV) piping systems. It connects 2-inch mainline runs to a 1.5-inch branch, allowing flow to split at a controlled angle without sharp transitions. The Schedule 40 wall thickness meets standard residential and light commercial DWV load requirements. Licensed plumbers install this fitting when reducing branch lines from a 2-inch main stack or horizontal drain run. It ships in a package quantity of 25 units, making it practical for service vehicles and job-site stock.

This reducing wye is suited for residential and light commercial drain, waste, and vent applications where a 2-inch main line must accept a 1.5-inch branch connection. Common install locations include bathroom wet walls, laundry drain rough-ins, and horizontal drain runs below floor decking. The wye angle promotes proper drainage slope and minimizes turbulence at the junction, which is critical for maintaining self-scouring velocity in DWV systems.

Key Features

• Schedule 40 PVC wall thickness for standard DWV service
• Reducing configuration: 2 inches by 2 inches mainline with 1.5-inch branch outlet
• Wye geometry supports proper drainage angle and reduces clogging risk
• Sold in a package of 25 units for job-site and inventory efficiency
• Compatible with solvent-cement joining methods standard to PVC DWV work

Compatibility

Designed as an OEM-style replacement and standard fitting for Schedule 40 PVC DWV piping systems in residential and light commercial applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Shut off water supply and verify the drain line is clear and dry before cutting into an existing system. Use a listed PVC solvent cement and primer appropriate for DWV service, and allow full cure time before restoring flow. Confirm branch slope meets code-required minimum grade for the pipe diameter being served.