Charlotte Pipe Pvc 00331 1000HA 3 in Dwv Vent Elbow Sch 40

Product Description

The Charlotte Pipe Foundry Co. PVC 00331 1000HA is a 3-inch Schedule 40 PVC DWV 90-degree vent elbow designed for drain, waste, and vent piping systems in residential and commercial construction. This fitting redirects flow at a 90-degree angle within vent stacks and branch lines, maintaining proper venting for trap seal integrity. Manufactured to Schedule 40 wall thickness, it provides reliable service in above-ground DWV installations. Licensed plumbers and pipefitters install this fitting as part of rough-in plumbing work governed by the International Plumbing Code and applicable local codes. The elbow ships in quantities of 25 units per package.

This elbow is suited for above-ground drain, waste, and vent applications in residential and light commercial plumbing systems. It is used in vent stack offsets, branch vent connections, and air admittance collar transitions where a 90-degree change in direction is required. The 3-inch nominal size accommodates common vent riser and branch vent configurations found in single-family and multi-family construction. It is not rated for pressure service or below-ground burial.

Key Features

• 3-inch nominal DWV sizing for standard vent stack and branch vent applications
• 90-degree sweep angle for direct directional transitions in vent piping
• Schedule 40 wall thickness for code-compliant above-ground DWV service
• PVC construction offers corrosion resistance in vent system environments
• Sold in packages of 25 units for job-site and shop stocking efficiency

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 3-inch Schedule 40 PVC DWV piping systems in above-ground residential and commercial plumbing applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code and applicable local amendments. Deburr and clean pipe ends before applying PVC solvent cement; follow cement manufacturer's dwell and cure time requirements before pressure-testing or putting the line into service. Shut off water supply and ensure the drain system is depressurized before cutting into an existing line. This fitting is intended for above-ground vent use only and should not be used in pressurized supply lines or buried applications.