Charlotte Pipe Pvc 00326 0600HA 1-1/2 in Dwv Street Elbow

Product Description

The Charlotte Pipe Foundry Co. PVC 00326 0600HA is a 1-1/2 inch, 22.5-degree PVC DWV street elbow used to change direction in drain, waste, and vent piping systems. Configured as a hub x spigot (street) connection, it accepts a pipe spigot on one end and connects to a hub fitting on the other, allowing back-to-back fitting makeup without an additional pipe stub. Made from white PVC, it is suited for residential and light commercial DWV applications. Plumbers and pipefitters install this fitting where shallow directional changes are required in gravity-flow drain lines.

This street elbow is used in residential and light commercial PVC DWV systems where a gentle 22.5-degree offset is needed — commonly in drain runs beneath slabs, inside walls, and in crawlspace installations. The street configuration simplifies tight-space assembly by eliminating the need for a short pipe nipple between consecutive fittings. It ships in a package quantity of 50 units, making it a practical stocking item for plumbing contractors and supply houses.

Key Features

• 22.5-degree bend angle for shallow directional changes in DWV drain runs
• Hub x spigot (street) end configuration allows direct fitting-to-fitting connections
• White PVC construction compatible with standard solvent-weld cement systems
• 1-1/2 inch size fits standard DWV drain and vent pipe
• Packaged in quantities of 50 for contractor and wholesale stocking

Compatibility

Designed as an OEM-style replacement and standard stock fitting for 1-1/2 inch PVC DWV piping systems using solvent-weld hub and spigot connections.

Installation Notes

Installation is performed by licensed plumbers in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off and drain the affected piping section before cutting in the fitting. Clean and dry all mating surfaces, then apply an appropriate PVC primer and solvent-weld cement rated for DWV service before joining. Allow adequate cure time per the cement manufacturer instructions before restoring flow.