Charlotte Pipe Pvc 00319 0600HA Dwv 60 Deg Elbow 1-1/2 in

Product Description

The Charlotte Pipe PVC 00319 0600HA is a 1-1/2-inch Schedule 40 PVC DWV elbow with a 60-degree bend angle. Manufactured from rigid PVC, it directs drain, waste, and vent lines at a 60-degree offset where a standard 90-degree or 45-degree fitting will not suit the run geometry. Schedule 40 wall thickness provides the structural integrity required for residential and light commercial DWV systems. Licensed plumbers and pipefitters install this fitting as part of gravity-drain waste stacks, horizontal drain branches, and vent piping assemblies.

This elbow is suited for drain, waste, and vent applications in residential construction, multi-family buildings, and light commercial projects. It is used in horizontal drain runs and offset vertical stack configurations where a 60-degree change of direction is required. The fitting accepts standard 1-1/2-inch Schedule 40 PVC pipe and is compatible with solvent-cement joining methods per standard DWV installation practice.

Key Features

• 60-degree bend angle for precise directional offsets in DWV piping systems
• Schedule 40 PVC wall thickness rated for residential and light commercial drain, waste, and vent service
• 1-1/2-inch nominal diameter fits standard DWV pipe and fittings
• Solvent-cement socket ends for reliable, leak-free joints
• Sold in a package quantity of 40 units per case

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 1-1/2-inch Schedule 40 PVC DWV piping systems using standard solvent-cement socket connections.

Installation Notes

Installation of DWV fittings is typically performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local code. Solvent-cement joints require proper primer and cement rated for PVC DWV service; follow the cement manufacturer's dwell and cure times before pressurizing or flowing the system. Verify all pipe ends are cut square, deburred, and dry before applying primer and cement. Maintain required drain slope per code — typically 1/4 inch per foot for 1-1/2-inch horizontal runs.