Charlotte Pipe Pvc 00302 0800HA 1-1/2 in Dwv St Elbow

Product Description

The Charlotte Pipe Foundry PVC 00302 0800HA is a 1-1/2 inch Schedule 40 PVC sanitary street elbow rated for drain, waste, and vent (DWV) applications. The street configuration features one spigot end and one socket end, allowing it to connect directly into a fitting hub without requiring an additional coupling. At 90 degrees, it redirects drain flow in tight spaces with a smooth interior surface that minimizes buildup. This fitting is installed by licensed plumbers and pipefitters working on residential and light commercial DWV systems. The unit weight for this package is 22.9 pounds per 100-piece case.

This street elbow is used in sanitary drainage systems where flow must change direction at a 90-degree angle. Common install scenarios include under-sink drain connections, toilet flange transitions, and branch line takeoffs in horizontal or vertical drain runs. The street end inserts directly into an adjacent elbow or tee hub, reducing the overall fitting count in congested rough-in areas. It is suited for residential new construction, remodel work, and light commercial plumbing projects that follow Schedule 40 PVC DWV standards.

Key Features

• Street configuration: one spigot end and one socket end for direct hub insertion
• 90-degree sweep redirects sanitary drain flow in vertical or horizontal runs
• Schedule 40 wall thickness rated for standard DWV service pressure requirements
• PVC material resists corrosion, scale, and common household drain chemicals
• Smooth interior bore supports unrestricted flow and reduces debris accumulation
• Sold in a 100-piece case, suitable for contractor volume purchasing

Compatibility

Designed as an OEM-style replacement and standard-stock fitting for 1-1/2 inch Schedule 40 PVC DWV piping systems following ASTM D2665 sanitary drainage standards.

Installation Notes

Installation is performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local code. Solvent-cement the spigot and socket joints using a PVC primer and PVC DWV-rated cement; do not use all-purpose cement on pressurized or high-flow drain lines without confirming suitability. Shut off and drain the affected drain line before cutting in or modifying existing piping. Maintain required grade and support spacing per code to prevent sagging after installation.