Charlotte Pipe Pvc 00107 1200HA Sch 40 Reducing Bushing 3x1.5 in

Product Description

The Charlotte Pipe Foundry PVC 00107 1200HA is a Schedule 40 PVC reducing bushing designed for drain, waste, and vent (DWV) piping systems. It transitions a 3-inch hub down to a 1.5-inch male end, allowing plumbers to reduce pipe size within a DWV run without additional fittings. Schedule 40 PVC provides adequate wall thickness and pressure rating for standard residential and light commercial drain and vent applications. This bushing is a spigot-by-socket style fitting installed by licensed plumbers and pipefitters during rough-in or repair work.

This reducing bushing is used in residential and light commercial DWV systems where a branch or continuation line requires a step-down from a 3-inch main to a 1.5-inch line. Typical applications include lavatory drain connections, vent stack reductions, and branch drain tie-ins. It is sold in packages of 30 units, making it practical for contractors stocking common DWV transition fittings on a job site or in a service vehicle.

Key Features

• Schedule 40 wall thickness rated for standard DWV service
• 3-inch socket inlet to 1.5-inch spigot outlet for in-line size reduction
• PVC construction resistant to common drain system chemicals and corrosion
• Packaged in quantities of 30 for contractor-level job site supply
• Suitable for drain, waste, and vent applications per standard plumbing codes

Compatibility

Designed as an OEM-style replacement and standard-fit component for Schedule 40 PVC DWV piping systems using 3-inch to 1.5-inch reducing connections.

Installation Notes

Installation is performed by a licensed plumber in accordance with the applicable International Plumbing Code (IPC) or local adopted code. Solvent-weld all joints using PVC primer and PVC cement rated for DWV service. Ensure both mating surfaces are clean, dry, and free of burrs before applying primer and cement. Do not apply heat or mechanical force to seat the joint after solvent cement has been applied.