Charlotte Pipe Pvc 00105 0800HA 2 in Sch 40 Cleanout Body

Product Description

The Charlotte Pipe Foundry PVC 00105 0800HA is a 2-inch Schedule 40 PVC cleanout body fitting configured with a Spigot x Female Iron Pipe (FIP) connection. This fitting provides access to drain and waste lines for rodding, inspection, or clearing blockages without requiring pipe cuts or disassembly. It is a standard component in residential and commercial drain-waste-vent (DWV) systems and is typically installed by licensed plumbers during rough-in or service work. The spigot end inserts into a hub fitting, while the FIP threaded opening accepts a standard cleanout plug.

This cleanout body is suited for use in Schedule 40 PVC DWV piping systems at 2-inch line sizes. Common install locations include under-slab drain runs, in-wall stacks, and horizontal branch lines where periodic access is required by code. Plumbing codes such as the IPC and UPC typically mandate accessible cleanouts at specific intervals and at changes of direction, making this fitting a routine part of new construction and remodel rough-in work. It is sold in a package quantity of 50 units, making it practical for contractors stocking for larger projects.

Key Features

• Schedule 40 PVC construction rated for standard DWV service
• Spigot x FIP configuration for straightforward integration into hub-and-spigot PVC drain systems
• FIP threaded opening accepts a standard cleanout plug for sealed access
• 2-inch line size fits one of the most common residential and light commercial drain branch sizes
• Available in a 50-unit package quantity for contractor-volume purchasing

Compatibility

Designed as an OEM-style replacement and standard-use fitting for 2-inch Schedule 40 PVC DWV piping systems using solvent-weld spigot connections and FIP-threaded cleanout plugs.

Installation Notes

Installation is performed by a licensed plumber in accordance with applicable local plumbing codes, including IPC or UPC requirements for cleanout placement and accessibility. Shut off water supply and ensure the line is depressurized and drained before cutting into an existing system to install this fitting. Use an approved PVC primer and solvent cement on the spigot end per manufacturer instructions and ASTM standards. The FIP threaded opening should be fitted with a compatible cleanout plug and thread sealant to maintain a watertight seal.