Charlotte Pipe Pvc 00104 0800HA Female Trap Adapter 1-1/2 in

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 00104 0800HA is a Schedule 40 PVC DWV female trap adapter sized at 1-1/2 inches, with a hub inlet and slip outlet. It connects drain piping to a fixture trap tailpiece, bridging the transition between solvent-welded hub pipe and a slip-fit tailpiece connection. This fitting is a standard component in residential and light commercial drain, waste, and vent systems. Plumbers and pipefitters install it beneath sinks and lavatories where a P-trap tailpiece must mate cleanly to the drain stub-out. The Schedule 40 wall thickness provides durability appropriate for above-ground DWV service.

This adapter is used in above-ground residential and commercial DWV applications, typically installed under kitchen sinks, bathroom lavatories, and utility sinks. The hub end receives a 1-1/2 inch PVC pipe solvent-welded into place, while the slip end accepts a standard 1-1/2 inch tailpiece without adhesive, allowing for easy removal and service of trap components. It is a go-to fitting for new rough-in work and repair jobs alike where a code-compliant trap connection is required.

Key Features

• Schedule 40 PVC construction rated for DWV above-ground service
• Hub x Slip configuration accepts a solvent-weld pipe on the inlet and a slip-fit tailpiece on the outlet
• 1-1/2 inch nominal size on both ends for standard residential drain applications
• Slip outlet designed to accept a standard trap tailpiece without adhesive for serviceability
• Sold in a package quantity of 50 units, suitable for stocking or multi-fixture jobs

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 1-1/2 inch Schedule 40 PVC DWV drain systems in residential and light commercial plumbing applications.

Installation Notes

Installation is performed by a licensed plumber in accordance with the applicable International Plumbing Code or local plumbing authority requirements. The hub end is solvent-welded using PVC primer and cement per manufacturer and code guidelines; the slip end requires no adhesive and should not be cemented, as it is intended to remain removable for trap service. Shut off water supply and clear the drain line before beginning work. Inspect the tailpiece diameter before installation to confirm a proper slip fit.