Charlotte Pipe Foundry Pvc 02113 1200HA 1-1/4 in Mpt Plug

Product Description

The Charlotte Pipe Foundry Co. PVC 02113 1200HA is a 1-1/4 inch white PVC male pipe thread (MPT) plug designed to create a pressure-tight seal at the open end of a pipe. Manufactured from PVC and meeting the requirements of ASTM D 2466, this plug is built for reliable service in low-pressure fluid handling and irrigation applications. The male pipe thread configuration threads directly into a female-threaded fitting or pipe end, capping the line cleanly without additional fittings. Plumbers, irrigation contractors, and sprinkler system installers use this plug to terminate or temporarily cap pipe runs during installation, testing, or system modification.

This plug is suited for residential and light commercial sprinkler and irrigation systems where PVC schedule 40 fittings are standard. It is a common choice for capping unused outlets on irrigation manifolds, sealing test ports, or closing off branch lines during phased installation. The white finish and PVC construction make it compatible with above-ground and in-ground irrigation piping where the material meets system requirements. Each package contains 25 plugs, supporting both service truck stocking and job-site bulk use.

Key Features

• 1-1/4 inch male pipe thread (MPT) connection seals directly into female-threaded fittings
• Meets ASTM D 2466 standard for PVC plastic pipe fittings, Schedule 40
• White PVC construction suitable for irrigation and sprinkler system applications
• Sold in a package of 25 units for convenient job-site or truck-stock quantities
• Creates a positive seal at the end of a pipe run without additional hardware

Compatibility

Designed as an OEM-style replacement and standard-use plug for PVC Schedule 40 irrigation and sprinkler systems requiring a 1-1/4 inch female-threaded termination point, conforming to ASTM D 2466 fitting standards.

Installation Notes

Installation is typically performed by licensed plumbers or irrigation contractors. Depressurize and drain the line before removing or installing any threaded plug. Apply thread sealant tape or liquid thread compound to the male threads before hand-tightening, then snug with a strap wrench — avoid overtightening PVC threads, as this can crack the fitting socket. Follow all applicable local plumbing codes and irrigation system manufacturer guidelines.