Charlotte Pipe Foundry Pvc 00400 1400HA 4in Dwv Sch 40 Tee

Product Description

The Charlotte Pipe Foundry Co. PVC 00400 1400HA is a 4-inch Schedule 40 PVC sanitary tee designed for drain, waste, and vent (DWV) systems. This fitting directs flow from a branch line into a main drain run while maintaining the proper directional sweep required by DWV installations. Made to Schedule 40 wall thickness standards, it delivers the structural rigidity needed for both above-slab and in-wall applications. Licensed plumbers and pipefitters install this fitting as part of residential and light commercial drain systems where PVC DWV piping is specified.

This sanitary tee is suited for residential and light commercial plumbing drain, waste, and vent assemblies. It connects a 4-inch branch to a 4-inch main line and is commonly installed at fixture stack connections, horizontal-to-vertical transitions, and primary drain runs. Sold in a package quantity of 5 units, it is practical for new construction framing stages or larger repair scopes requiring multiple fittings. All installations must conform to applicable local plumbing codes and the International Plumbing Code (IPC) where adopted.

Key Features

• 4-inch Schedule 40 wall thickness for structural rigidity in DWV applications
• PVC construction resists corrosion and chemical degradation common in drain and waste service
• Sanitary tee geometry provides proper directional flow from branch to main drain
• Suitable for above-slab, in-wall, and underground DWV installations where PVC is code-approved
• Packaged in quantities of 5 for efficient stocking on multi-fixture jobs

Compatibility

Designed as an OEM-style replacement and new-construction fitting for 4-inch Schedule 40 PVC DWV piping systems in residential and light commercial plumbing applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the IPC. Solvent-cement all PVC joints using a code-approved PVC primer and cement rated for DWV service. Shut off water supply and ensure the drain line is depressurized and cleared before cutting into an existing system. Verify proper slope and support spacing per code before securing the fitting in place.