Charlotte Pipe CTS120100600 Cpvc Pipe 1 in Sdr 11 400 Psi

Product Description

The Charlotte Pipe Foundry CTS120100600 is a 1-inch diameter, 10-foot length CPVC water pipe built to SDR 11 dimensional standards and rated for 400 PSI working pressure at 73 degrees F. Manufactured under the FlowGuard Gold CPVC material specification, this pipe features a solid wall construction with plain ends for solvent-cement joining. It conforms to ASTM D-2846 dimensional and pressure requirements and meets NSF Standard 61 for potable water contact safety. Licensed plumbers and pipefitters use this pipe for hot and cold domestic water distribution in residential and light commercial construction.

This pipe is suited for indoor domestic water supply systems where CPVC is the specified material. Its plain-end design accommodates standard CPVC CTS solvent-weld fittings. SDR 11 wall thickness provides consistent pressure performance across the full 10-foot length. The NSF 61 listing makes it acceptable for use in potable water systems where code compliance is required. It is commonly installed in new construction and repipe projects in residential single-family and multi-family buildings, as well as light commercial applications where CPVC is code-approved.

Key Features

• 400 PSI pressure rating at 73 degrees F per ASTM D-2846
• SDR 11 solid wall construction for consistent wall thickness along full pipe length
• Plain ends ready for solvent-cement joining with standard CTS CPVC fittings
• NSF Standard 61 listed for safe use in potable water distribution
• FlowGuard Gold CPVC material formulation for long-term thermal and chemical resistance
• 10-foot stick length sold in package quantities of 15

Compatibility

Designed for use with standard CTS-dimensioned CPVC solvent-weld fittings and couplings in 1-inch size. Compatible with potable water systems requiring ASTM D-2846 and NSF 61 compliant pipe material.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and IPC or applicable regional code requirements. Shut off the water supply and relieve system pressure before cutting into any existing line. Use a CPVC-rated solvent cement and primer as specified by the fitting and cement manufacturer — do not substitute PVC cement. Allow full cure time before pressurizing the system.