Charlotte Pipe CTS120070600 Cpvc Pipe 3/4 Inch 10 Foot

Product Description

The CHARLOTTE PIPE CTS120070600 is a 3/4-inch by 10-foot FlowGuard Gold CPVC pipe designed for hot and cold potable water distribution in residential and light commercial pressure systems. This pipe is manufactured from a high-impact, higher-density CPVC resin that delivers increased toughness year-round. It carries a long-term stress rupture rating of 100 psi at 180 degrees F and 400 psi at 73 degrees F, making it suitable for high-temperature water service. Licensed plumbers and pipefitters install this pipe as part of supply-side distribution systems.

This CPVC pipe is used in pressure-rated hot and cold water supply systems where thermoplastic piping is specified. Common applications include new construction and retrofit plumbing in residential homes, apartment buildings, and light commercial facilities. It conforms to ASTM D2846, the governing standard for CPVC plastic hot- and cold-water distribution systems. This pipe must be joined using a CPVC cement specifically approved for use with FlowGuard Gold CPVC pipe.

Key Features

• High-impact, higher-density CPVC resin for increased toughness in temperature-variable conditions
• Rated for hot and cold water distribution in pressure systems
• Long-term stress rupture of 100 psi at 180 degrees F and 400 psi at 73 degrees F
• Conforms to ASTM D2846 for CPVC hot- and cold-water distribution pipe
• 3/4-inch diameter in a 10-foot length for standard residential supply runs

Compatibility

Designed as a pressure-rated CPVC water distribution pipe conforming to ASTM D2846; must be used with CPVC cement and fittings approved for FlowGuard Gold CPVC systems.

Installation Notes

Installation must be performed by a licensed plumber in accordance with applicable local plumbing codes and the IPC. Shut off the water supply and relieve system pressure before cutting into any existing piping. Use only solvent cement rated for FlowGuard Gold CPVC pipe; do not substitute PVC cement or fittings not rated for this material. Allow full cure time per the cement manufacturer instructions before pressurizing the system.