Charlotte Pipe Abs 00812 0600HA Abs Closet Flange 4x3 in

Product Description

The CHARLOTTE PIPE FOUNDRY CO. ABS 00812 0600HA is an ABS DWV closet flange designed to connect a drainage system to a toilet at floor level. It features a spigot end and an adjustable metal ring that allows for precise positioning during rough-in and finish installation. The flange is manufactured from black ABS material and is rated for non-pressure drain, waste, and vent applications. Plumbers and licensed drain installers use this fitting in residential and light commercial construction where ABS DWV piping is the system of choice. The adjustable ring accommodates minor floor height variations without requiring a full flange replacement.

This closet flange is used in residential and light commercial plumbing systems wherever a toilet must be anchored and sealed to an ABS DWV drain stack or branch line at floor level. The 4-inch top opening seats a standard wax ring and toilet horn, while the 3-inch spigot connects directly into a 3-inch ABS drain line. It is suited for new construction and remodel work in single-family homes, multi-family buildings, and similar structures where ABS drainage systems are permitted by local code.

Key Features

• Adjustable metal ring allows fine positioning to match finished floor height
• Spigot end connects directly into 3-inch ABS DWV pipe
• 4-inch top opening accepts standard wax ring and toilet hardware
• Black ABS construction rated for non-pressure drain, waste, and vent service
• Low chemical resistance rating — suitable for typical residential DWV waste streams

Compatibility

Designed as an OEM-style replacement and new-construction fitting for residential and light commercial ABS DWV drain systems requiring a 4-inch x 3-inch spigot closet flange connection at floor level.

Installation Notes

Installation must be performed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and ensure the drain line is clear before beginning work. Solvent-weld the spigot end into the 3-inch ABS branch line using ABS-rated cement and primer per manufacturer and code requirements. Do not use this fitting in pressurized supply or pressure-rated applications.