Charlotte Pipe Abs 00707X 0600HA 1-1/2 in P-trap Clean Out

Product Description

The Charlotte Pipe Foundry ABS 00707X 0600HA is a 1-1/2-inch ABS DWV P-trap with an integrated clean-out fitting designed for non-pressure drain, waste, and vent installations. Molded from black ABS material, this trap creates a water seal that blocks sewer gas from migrating out of the drain system and into the occupied space through plumbing fixture drains. The clean-out plug provides direct access to the trap arm for clearing blockages without disassembling the drain connection. Licensed plumbers install this fitting in residential and light commercial DWV systems.

This P-trap is suited for non-pressure drain, waste, and vent applications where an ABS-compatible fitting is required. Typical installations include lavatory sinks, laundry tubs, and similar fixtures that connect to a 1-1/2-inch drain branch. The clean-out access point makes it a practical choice in locations where serviceability is a priority. The black ABS construction is compatible with standard ABS DWV solvent-weld systems. Note that this fitting carries a low chemical resistance rating and should not be used in drain lines exposed to strong solvents or aggressive chemicals.

Key Features

• Integrated clean-out plug provides trap access without removing the fitting
• Water seal prevents sewer gas passage from drain system into living spaces
• 1-1/2-inch sizing fits standard DWV branch drain connections
• Black ABS material accepts standard ABS solvent-weld cement
• Rated for non-pressure drain, waste, and vent service only
• Low chemical resistance — not suitable for aggressive solvent drain lines

Compatibility

Designed for use in non-pressure ABS DWV piping systems. Compatible with standard 1-1/2-inch ABS drain, waste, and vent pipe and fittings joined by solvent-weld method.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code. Shut off the water supply and confirm the drain line is clear before beginning work. Use only ABS-rated solvent cement and primer as required by code; do not mix ABS fittings with PVC pipe in a solvent-welded connection. Allow full cure time per the cement manufacturer instructions before restoring flow.