Charlotte Pipe Abs 00502 1200HA Abs Dwv Long Turn Tee Wye

Product Description

The Charlotte Pipe Foundry ABS 00502 1200HA is an ABS DWV long turn tee wye fitting used in non-pressure drain, waste, and vent piping systems. It connects at three hub ends — two at 3 inches and one at 1.5 inches — to allow a branch line to split off a main drainage run with a gradual, long-turn sweep. That long-turn geometry reduces the chance of blockage at the junction and promotes smooth, gravity-fed flow. The fitting is molded from black ABS material and is suited for residential and light commercial DWV rough-in work. Licensed plumbers and pipefitters are the typical installers.

This fitting is designed for non-pressure drain, waste, and vent applications where a branch connection is needed on a 3-inch main line, with a 1.5-inch lateral outlet. It is commonly used in residential bathroom, kitchen, and laundry drain rough-ins, as well as light commercial DWV systems. The hub-by-hub-by-hub connection style accepts solvent-weld ABS pipe at all three ports. It is not rated for pressure service and carries low chemical resistance, so it should not be used in systems that convey aggressive solvents or industrial chemicals.

Key Features

• Long-turn tee wye geometry promotes smooth, gravity-fed drainage flow and reduces clog risk at the branch junction
• Three hub ends accept solvent-weld ABS pipe — no threads, no mechanical fittings required
• 3-inch x 3-inch x 1.5-inch configuration suits standard residential and light commercial DWV layouts
• Black ABS material is lightweight and easy to cut and solvent-weld in the field
• Rated for non-pressure drain, waste, and vent service only — not for pressurized lines
• Package quantity of 15 units per pack supports multi-unit or larger rough-in jobs

Compatibility

Designed as an OEM-style solvent-weld fitting for non-pressure ABS DWV piping systems using 3-inch and 1.5-inch schedule-40 ABS pipe.

Installation Notes

Installation is performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local code. Before beginning work, shut off water supply and ensure the drain system is cleared of any standing waste. Clean and dry all hub sockets and pipe ends before applying ABS solvent cement; follow the cement manufacturer's open and set times for the ambient temperature. Do not apply solvent cement to a wet or contaminated surface, and do not use this fitting on pressurized supply lines.