Charlotte Pipe Abs 00304 0600HA 1-1/2 in Abs Dwv 90 Deg Elbow

Product Description

The CHARLOTTE PIPE FOUNDRY CO. ABS 00304 0600HA is a 1-1/2 inch ABS long sweep 90-degree hub x hub elbow designed for non-pressure drain, waste, and vent (DWV) piping systems. The long sweep geometry provides a gradual directional change, reducing flow restriction compared to a standard 90-degree fitting. Made from black ABS material, this elbow connects two hub-end pipe segments and is sized for standard 1-1/2 inch DWV pipe. It is installed by licensed plumbers and journeyman pipefitters in both residential and light commercial applications where ABS DWV systems are permitted by local code.

This fitting is used in non-pressure drain, waste, and vent installations where a 90-degree turn is required in a run of pipe. Common applications include lavatory drains, kitchen sink drains, laundry standpipes, and vent stack offsets. The hub x hub configuration accepts plain-end ABS pipe on both sides, bonded with ABS solvent cement. It is not rated for pressure service or outdoor UV-exposed installations without additional protection. This fitting ships in a package quantity of 50 units, making it practical for contractors stocking job-site material.

Key Features

• Long sweep 90-degree geometry reduces flow restriction in drain and waste lines
• Hub x hub end configuration accepts standard 1-1/2 inch ABS plain-end pipe on both sides
• Black ABS material is lightweight and compatible with ABS solvent-cement joining methods
• Rated for non-pressure drain, waste, and vent service only — not for pressurized systems
• Packaged in quantities of 50 for contractor and wholesale supply use

Compatibility

Designed as an OEM-style DWV fitting for use with standard 1-1/2 inch ABS drain, waste, and vent piping systems in non-pressure applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local plumbing code. Shut off water supply and ensure the drain line is clear before cutting into an existing system. Joining requires approved ABS solvent cement applied to both the pipe end and the hub socket per the cement manufacturer's instructions. ABS fittings should not be used with PVC pipe or PVC solvent cement — use only ABS-compatible joining materials.