Charlotte Pipe Abs 00300 0800HA 2 in 90 Deg Abs Dwv Elbow

Product Description

The CHARLOTTE PIPE FOUNDRY CO. ABS 00300 0800HA is a 2-inch, 90-degree hub x hub elbow fitting designed for drain, waste, and vent (DWV) piping systems. Constructed from ABS plastic, this fitting changes the direction of drainage flow by 90 degrees and connects using a solvent weld method without the use of primer. It carries a maximum working pressure of 5 psi, making it strictly a non-pressure DWV application fitting. Licensed plumbers and pipefitters install this elbow as part of residential and light commercial drain and vent assemblies where a quarter-bend directional change is required. The black ABS construction is lightweight, impact-resistant, and compatible with standard ABS solvent cement.

This elbow is used in DWV installation systems to route wastewater away from plumbing fixtures such as sinks, tubs, and floor drains. It also supports air circulation within drainage piping, a critical function for proper venting. The hub x hub (1/4 bend) configuration accepts pipe into both ends, providing a clean solvent-welded joint on each side. This fitting is suited for residential new construction, remodel drain rough-in work, and repair applications where a 90-degree directional change is needed in an ABS DWV line.

Key Features

• 90-degree directional change in a hub x hub (1/4 bend) configuration
• ABS plastic construction — lightweight and compatible with standard ABS solvent cement
• Solvent weld connection — do not use primer with ABS fittings
• Rated for non-pressure DWV applications up to 5 psi maximum working pressure
• Supports wastewater removal and air circulation in drainage piping
• Black color finish standard for ABS DWV fittings

Compatibility

Designed for use in ABS DWV piping systems for non-pressure drain, waste, and vent applications. Compatible with standard 2-inch ABS DWV pipe joined by solvent weld without primer.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and ensure the drain line is clear before cutting into an existing system. Use only ABS-compatible solvent cement — never apply primer to ABS fittings, as it degrades the material. Allow adequate cure time per the solvent cement manufacturer instructions before restoring flow.