Charlotte Pipe Abs 00106 0600HA Abs Dwv Mpt Plug 1-1/2 in

Product Description

The CHARLOTTE PIPE FOUNDRY CO. ABS 00106 0600HA is a 1-1/2-inch male pipe thread (MPT) plug for ABS drain, waste, and vent (DWV) piping systems. It creates a secure mechanical seal at the open end of a pipe, terminating flow paths during testing, capping unused branch outlets, or closing off sections of a non-pressure DWV system. Molded from black ABS material, the plug is rated for non-pressure drain, waste, and vent applications. Licensed plumbers and pipefitters install this fitting in residential and light commercial systems where ABS plastic piping is used throughout the drain and vent network.

This plug is designed for non-pressure ABS DWV installations in residential and light commercial construction. Typical applications include capping stub-outs during rough-in inspections, plugging test tees, and closing unused inlets on sanitary drain lines. It threads directly onto male-threaded pipe ends or fittings using standard NPT engagement. ABS DWV applications are common in single-family homes, multifamily residential buildings, and small commercial projects where plastic drain piping is code-approved by the authority having jurisdiction.

Key Features

• 1-1/2-inch male pipe thread (MPT) connection for direct engagement on threaded pipe ends
• ABS construction rated for non-pressure drain, waste, and vent service
• Creates a positive seal at open pipe terminations during installation or testing
• Black ABS material provides adequate chemical resistance for standard DWV waste streams
• Sold in a package quantity of 50 units, suitable for stocking or multi-unit projects

Compatibility

Designed as an OEM-style fitting for use in non-pressure ABS DWV piping systems in residential and light commercial applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the applicable plumbing code, such as the IPC or UPC as adopted locally. Ensure all flow is stopped and the pipe section is clear before installing the plug. Thread the plug onto the male-threaded fitting by hand first, then tighten with a strap wrench or pipe wrench — avoid overtightening ABS threads as the material can crack under excessive torque. Inspect the seal during rough-in pressure or air testing before closing walls or covering the installation.