Charlotte Pipe Abs 00102 0600HA Abs Dwv Reducer Coupling 2x1.5

Product Description

The Charlotte Pipe Foundry ABS 00102 0600HA is an ABS DWV reducer coupling in a hub-by-hub configuration, designed to join two lengths of ABS pipe while stepping down from a 2-inch pipe to a 1-1/2-inch pipe in a single fitting. It is used exclusively in non-pressure drain, waste, and vent systems. The hub-by-hub ends accept standard ABS pipe for solvent-cement connections. This fitting carries low chemical resistance ratings and is not suitable for pressure applications. Plumbers and pipefitters install this coupling during new construction and retrofit DWV rough-in work where a pipe size reduction is needed in-line.

This reducer coupling is intended for residential and light commercial non-pressure DWV installations. Typical applications include drain line transitions, waste stack offsets, and vent pipe reductions where a 2-inch run must connect to a 1-1/2-inch downstream line. The fitting is sold in a package quantity of 25 units, making it practical for contractors stocking material for multi-fixture rough-in jobs. It is not rated for pressure service, hot-side supply lines, or chemical drainage systems requiring high chemical resistance.

Key Features

• Reduces from 2 inches to 1-1/2 inches in a single hub-by-hub fitting
• ABS material with solvent-cement hub connections on both ends
• Rated for non-pressure drain, waste, and vent service only
• Low chemical resistance — not suitable for aggressive chemical drain systems
• Sold in a package quantity of 25 units per package

Compatibility

Designed as an OEM-style DWV fitting compatible with standard 2-inch and 1-1/2-inch ABS drain, waste, and vent pipe systems in non-pressure applications.

Installation Notes

Installation is performed by licensed plumbers following applicable IPC or local plumbing code requirements. Before installation, shut off any water supply and ensure the drain system is clear of flow. Solvent-cement both hub ends using ABS-rated cement and primer in accordance with the cement manufacturer and code requirements. Do not use this fitting in pressurized water supply lines or in systems conveying chemicals beyond the low chemical resistance rating of ABS.