Cavagna 30A1900006 Lp Gas Pigtail Pol X 1/4 in Inverted Flare

Product Description

The CAVAGNA 30A1900006 is an LP gas pigtail connector used to link a propane cylinder valve to downstream regulators or gas appliance supply lines. It features a male POL inlet fitting on one end and a 1/4 inch inverted flare outlet on the other, with an overall length of 20 inches. The 7/8 inch hex wrench flats on the POL end allow for proper torque during installation. This type of pigtail is a standard connection component in propane distribution systems and is installed by licensed plumbers and gas fitters working on residential and light commercial LP setups.

This connector is suited for use in propane systems where a flexible pigtail is required between a cylinder POL valve and a first-stage or integral regulator. The 20 inch length provides enough flexibility to accommodate minor movement or vibration in cylinder installations. The inverted flare outlet is a common fitting type on LP regulators and service lines, making this a practical interface component in typical propane appliance hook-up work.

Key Features

• Male POL inlet fitting for direct connection to standard propane cylinder valves
• 1/4 inch inverted flare outlet for regulator or supply line connection
• 20 inch pigtail length for installation flexibility
• 7/8 inch hex on POL end for wrench engagement during tightening
• Designed for LP gas service in residential and light commercial applications

Compatibility

Designed as an OEM-style replacement pigtail connector for LP gas systems using standard POL cylinder valves and 1/4 inch inverted flare regulator or line connections.

Installation Notes

Installation should be performed by a licensed plumber or gas fitter in accordance with applicable local codes and NFPA 58 requirements for LP gas systems. Always close the propane cylinder valve and verify zero pressure in the line before disconnecting or connecting any fittings. Use an appropriately sized wrench on the hex flats to secure the POL connection — do not overtighten. After installation, leak-test all connections with an approved leak detection solution before returning the system to service.

Technical Specifications

• Inlet Fitting: Male POL
• Outlet Fitting: 1/4 inch inverted flare
• Overall Length: 20 inches
• Hex Size: 7/8 inches
• Gas Type: LP (propane)

Standard Information

• Brand: CAVAGNA
• Manufacturer Part Number: 30A1900006