Carrier mmk-ap0247hpul Vrf High Wall Heat Pump 24000 Btu/h

Product Description

The CARRIER mmk-ap0247hpul is a ductless variable refrigerant flow (VRF) high wall indoor heat pump unit rated at 24,000 BTU/h cooling and 27,000 BTU/h heating. Operating on 208-230 VAC single-phase 60 Hz power with R-410A refrigerant, this unit mounts directly to an interior wall and connects to a compatible VRF outdoor system via flare fittings. Airflow ranges from 353 to 706 CFM depending on operating mode and fan speed. Licensed HVAC technicians familiar with VRF system commissioning and refrigerant handling install and service this unit.

This indoor air handler is designed for wall-mounted ductless VRF applications in residential and light commercial settings where zoned, independent temperature control is required. The unit is suited for single-zone or multi-zone VRF configurations. It carries ETL Listed approval and is finished in white for a clean, low-profile appearance on interior walls. The unit belongs to the MMK-AP product family and ships from Thailand.

Key Features

• 24,000 BTU/h cooling capacity and 27,000 BTU/h heating capacity in a 2-ton class wall unit
• Variable airflow from 353 to 706 CFM for flexible zone conditioning
• R-410A refrigerant with flare-type liquid line (3/8 inch OD) and suction line (5/8 inch OD) connections
• Single-phase 208-230 VAC, 60 Hz operation with a 15-amp maximum overcurrent protection (MOCP) rating
• Wall-mount design at 41.375 inches wide, 12.5625 inches tall, and 9.125 inches deep
• ETL Listed for safety compliance
• Sound level rated at 45 dBA for low-noise indoor operation

Compatibility

Designed for use within the Toshiba Carrier MMK-AP VRF system family. Specific compatible outdoor unit models were not provided in the available data; consult the Toshiba Carrier VRF system engineering guide or submittal documentation to confirm outdoor unit pairing before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician certified to handle R-410A refrigerant under applicable EPA Section 608 regulations. Disconnect and lock out all power to the system before making any electrical or refrigerant connections. Flare all refrigerant line connections to the specified OD sizes and pressure-test the line set prior to charging. Follow local mechanical and electrical codes, including NEC requirements for overcurrent protection sizing, and refer to the manufacturer installation manual for mounting bracket placement and drain line routing.

Technical Specifications

• Cooling Capacity: 24,000 BTU/h
• Heating Capacity: 27,000 BTU/h
• Tonnage: 2 tons
• Voltage: 208-230 VAC
• Phase: Single
• Cycle/Hertz: 60 Hz
• Maximum Overcurrent Protection (MOCP): 15 amps
• Airflow (CFM): 353-706 CFM
• Sound Level: 45 dBA
• Refrigerant: R-410A
• Liquid Line Fitting Type: Flare
• Liquid Line Size (OD): 3/8 inch
• Suction Line Fitting Type: Flare
• Suction Line Size (OD): 5/8 inch
• Mounting Type: Wall-Mount
• Width: 41.375 inches
• Height: 12.5625 inches
• Depth: 9.125 inches
• Weight: 36 pounds
• Color: White
• Approvals: ETL Listed
• Country of Origin: Thailand

Standard Information

• Brand: CARRIER
• Manufacturer Part Number: mmk-ap0247hpul