Carrier ERVXXSHA1150 Erv 150 Cfm Horizontal

Product Description

The CARRIER ERVXXSHA1150 is a small horizontal energy recovery ventilator rated at 150 CFM, designed to bring fresh outdoor air into a building while recovering energy from the outgoing exhaust air stream. It operates on 120-volt, single-phase, 60 Hz power and draws 163 watts at full load. The unit uses end ports for duct connections and is sized for residential or light commercial indoor installations. Licensed HVAC technicians install this unit as part of a whole-home or commercial ventilation system, typically tied into the main duct distribution network to maintain indoor air quality without significant energy loss.

This ventilator is intended for horizontal installations in indoor environments where controlled mechanical ventilation is required. It is well suited for residential new construction or retrofit projects where building codes or energy standards call for continuous or demand-controlled fresh air delivery. The horizontal airflow orientation and small-profile housing make it a practical fit for tight mechanical room spaces, attic installations, or above-ceiling locations where vertical clearance is limited.

Key Features

• 150 CFM rated airflow with horizontal orientation and end-port duct connections
• Energy recovery core transfers heat and moisture between incoming and outgoing airstreams to reduce conditioning loads
• Single-phase 120-volt, 60 Hz operation at 163 watts
• Compact small-horizontal housing at 19.125 inches high, 23.5 inches long, and 21 inches wide
• Indoor mounting environment suited for mechanical rooms, attic spaces, and above-ceiling applications
• Unit weight of 37 pounds allows straightforward handling during installation

Compatibility

Designed as an OEM-style energy recovery ventilator for residential and light commercial ducted ventilation systems requiring horizontal installation with end-port duct connections at 150 CFM.

Installation Notes

Installation should be performed by a licensed HVAC technician in accordance with local mechanical codes and ASHRAE 62.2 ventilation standards. Disconnect and lock out all electrical power before making any wiring or duct connections. Ensure the unit is properly supported in its horizontal orientation using a secure mounting platform or hanger system rated for the unit weight. Seal all duct connections at the end ports to prevent air leakage that would reduce ventilation efficiency.

Technical Specifications

• Airflow (CFM): 150
• Airflow Position: Horizontal
• Voltage: 120-1-60 (120 volts, single-phase, 60 Hz)
• Wattage: 163 watts
• Motor Phase: 1
• Height: 19.125 inches
• Length: 23.5 inches
• Width: 21 inches
• Weight: 37 pounds
• Mounting Environment: Indoor
• Port Location: End ports

Standard Information

• Brand: CARRIER
• Manufacturer Part Number: ERVXXSHA1150