Carpenter Paterson 1ae-4 Band Hanger 4 Inch Rod Mount

Product Description

The CARPENTER PATERSON 1ae-4 is a rod-mount band hanger designed to support non-insulated, stationary pipe lines from above. Fabricated from carbon steel with an electrogalvanized finish, it provides corrosion resistance in standard mechanical and plumbing installations. The lower nut adjusts the pipe line to the proper elevation, and the top nut locks the assembly against loosening caused by vibration. Both nuts are field-supplied and must be tightened securely for correct hanger performance. Rated to 1,250 pounds load capacity and suitable for service up to 140 degrees F, this hanger suits a wide range of commercial and industrial piping applications where dependable overhead pipe support is required.

The 1ae-4 is used in commercial and industrial mechanical piping systems where 4-inch non-insulated pipe lines require overhead, rod-mount support. Typical installations include HVAC hydronic distribution, domestic water, and process piping runs suspended from structural members. Licensed plumbers and pipefitters install this hanger in conjunction with threaded rod and nuts to achieve precise pipe elevation and secure, vibration-resistant support. The hanger accepts a 1/2-inch mounting rod, making it compatible with standard threaded-rod suspension systems commonly found in commercial mechanical rooms and overhead utility chases.

Key Features

• Carbon steel construction with electrogalvanized finish for corrosion resistance in standard indoor environments
• 1,250-pound load rating supports heavy stationary pipe runs
• Adjustable lower nut allows precise pipe elevation setting during installation
• Top nut locks hanger against vibration-induced loosening when tightened securely
• Accepts 1/2-inch threaded rod for compatibility with standard suspension hardware
• Rated to 140 degrees F for typical commercial and light industrial service conditions

Compatibility

Designed as an OEM-style replacement or new-installation band hanger for 4-inch non-insulated, stationary pipe lines using standard 1/2-inch rod-mount suspension systems. Meets Federal Specification A-A-1192A and MSS SP-69.

Installation Notes

Installation is typically performed by a licensed plumber or pipefitter. Power down or isolate the piping system before making any connections to the supported line. Field-supply the lower and upper nuts rated for the application load, and tighten the top nut securely to prevent loosening from vibration. Follow applicable local mechanical codes and MSS SP-69 guidelines for hanger spacing, rod sizing, and structural attachment.

Technical Specifications

• Type: Band, Rod Mount
• Pipe Size: 4 inches
• Hanger Mounting Rod Size: 0.5 inches
• Height: 6.5 inches
• Material: Carbon Steel
• Finish: Electrogalvanized
• Load Rating: 1,250 pounds
• Temperature Rating: 140 degrees F
• Applicable Standards: Federal Specification A-A-1192A, MSS SP-69
• Warranty: 1 Year Limited

Standard Information

• Brand: CARPENTER PATERSON
• Manufacturer Part Number: 1ae-4