Carpenter Paterson 100-6 Clevis Hanger 6 Inch Black

Product Description

The CARPENTER PATERSON 100-6 is a rod-mount clevis hanger designed to support non-insulated, stationary pipe lines from above. Built from carbon steel with a black finish, this hanger carries a 1,940-pound load rating and is rated for temperatures up to 650 degrees F. It is engineered for 6-inch pipe and provides approximately 1 inch to 1.5 inches of vertical adjustment after the pipe is set in place. The lower nut adjusts the pipe line to the correct elevation, while the top nut locks the assembly against loosening from vibration. Both nuts are field-supplied and must be tightened securely for proper performance. Licensed piping mechanics and industrial pipefitters install this type of hanger in mechanical and process piping systems.

This clevis hanger is suited for commercial, industrial, pharmaceutical, petrochemical, and hospital applications where stationary, non-insulated pipe lines require secure overhead support. The rod-mount configuration accepts a 3/4-inch diameter hanger rod. With a centerline distance of 7 inches and a rod take-out dimension of 5.875 inches, it fits standard pipe support layouts used in heavy mechanical and process piping installations.

Key Features

• Supports 6-inch non-insulated, stationary pipe lines with a 1,940-pound load rating
• Provides 1 inch to 1.5 inches of vertical adjustment after pipe installation
• Carbon steel construction with black finish for durability in demanding environments
• Temperature rated to 650 degrees F for high-temperature piping systems
• Accepts 3/4-inch diameter hanger rod for standard rod-mount installations
• Meets ASME B31.1, ANSI/MSS SP-58/SP-69 Type 1, UL, FM, and other applicable standards

Compatibility

Designed for use with 6-inch non-insulated, stationary pipe lines in commercial, industrial, pharmaceutical, petrochemical, and hospital piping systems. Suitable for overhead rod-mount pipe support installations conforming to ASME B31.1, AA-1192A Type 1, ANSI/MSS SP-58/SP-69 Type 1, BSPSS-BS3974, UL, WW-H-171E Type 1, and FM standards.

Installation Notes

Installation should be performed by a licensed pipefitter or mechanical contractor in accordance with applicable mechanical and piping codes. Shut down and depressurize the pipe line before installing or adjusting any hanger hardware. Hanger rod, lower nut, and top nut are not included and must be sourced separately. Tighten the top nut securely after setting the pipe elevation to prevent loosening from system vibration.

Technical Specifications

• Load Rating: 1,940 pounds
• Temperature Rating: 650 degrees F
• Pipe Size: 6 inches
• Hanger Rod Diameter: 0.75 inchesCenterline Distance: 7 inches
• Rod Take-Out Dimension: 5.875 inches
• Material: Carbon Steel
• Finish: Black
• Hanger Type: Clevis, Rod Mount
• Applicable Standards: ASME B31.1, AA-1192A Type 1, ANSI/MSS SP-58/SP-69 Type 1, BSPSS-BS3974, UL, WW-H-171E Type 1, FM
• Application: Commercial, Industrial, Pharmaceutical, Petrochemical, Hospital
• Weight: 3 pounds
• Warranty: 1 Year Limited

Standard Information

• Brand: CARPENTER PATERSON
• Manufacturer Part Number: 100-6