Cantex A51BAA1 Ent Flexible Conduit 1 in 100 Ft Pvc 600V

Product Description

The CANTEX A51BAA1 is a 1-inch trade size Electrical Nonmetallic Tubing (ENT) supplied in a 100-foot coil. Made from PVC and colored electric blue for code identification, this conduit carries a 600-volt maximum voltage rating and a temperature range of -20 to 50 degrees C. It meets NEMA TC-13 and NEC Article 362 requirements and carries both UL and CSA approvals. The corrugated construction allows hand bending without a conduit bender or special tooling. Licensed electricians install ENT in concealed, above-grade applications in new residential and light commercial construction.

ENT conduit is used in residential framing, commercial wood-frame construction, and other concealed interior locations permitted under NEC 362. The 1.059-inch inner diameter and smooth-profile corrugations reduce wire-pull drag, making it practical for pulling multiple conductors in a single run. The 100-foot coil format reduces cut waste on typical room-to-panel runs. This product is rated for use with 90-degree C conductors, making it compatible with common THHN and THWN-2 building wire used in residential and light commercial wiring.

Key Features

• Corrugated PVC design bends by hand, eliminating the need for bending equipment
• Rated for 90-degree C conductors, compatible with THHN and THWN-2 wire
• 600-volt maximum voltage rating meets NEC 362 and NEMA TC-13 standards
• UL and CSA listed for code-compliant installations
• Non-conductive and corrosion-resistant PVC construction
• Reduced inner surface profile cuts wire-pull drag on long runs

Compatibility

Designed as an OEM-style ENT conduit replacement or new-installation conduit for concealed interior applications in residential and light commercial construction where NEC Article 362 permits ENT use.

Installation Notes

ENT conduit is installed by licensed electricians and must be used only in locations permitted under NEC Article 362, including concealed work in walls, floors, and ceilings of buildings no taller than the height limits specified by the NEC. De-energize all circuits in the work area before pulling conductors or making connections at boxes. Use listed ENT fittings and couplings rated for the same trade size; do not substitute EMT or rigid fittings. ENT is not approved for direct burial, exposed outdoor locations, or areas subject to physical damage unless specifically listed for such use.