Campbell T4900624 Cold Shut Link 3/8 in 1900 Lb Carbon Steel

Product Description

The CAMPBELL T4900624 is a 3/8-inch diameter carbon steel cold shut link rated to a 1,900-pound work load limit. Cold shut links are used to connect chain to hooks, rings, and other rigging hardware without requiring a threaded fastener. This link features a zinc finish for corrosion resistance and is suited for general-purpose rigging, tie-down, and load-securing applications. It is not rated or approved for overhead lifting. Rigging professionals, contractors, and trade workers who need a reliable mechanical connecting link for non-lifting chain assemblies will find this a direct fit for standard 3/8-inch chain work.

This cold shut link is designed for use in ground-level rigging, securing, and bundling applications where chain connections are needed without a permanent weld or threaded closure. The 3/8-inch diameter suits medium-duty chain commonly used in construction, agricultural, and industrial settings. At 1,900 pounds work load limit, it is appropriate for general tie-down and restraint work. It is not intended for lifting, hoisting, or overhead rigging under any configuration.

Key Features

• 3/8-inch diameter carbon steel construction for durability in medium-duty applications
• 1,900 lb work load limit suitable for tie-down and securing tasks
• Zinc finish provides added corrosion resistance for extended service life
• Cold shut link design allows quick chain connection without tools or threaded hardware
• Compact inside dimensions of 1.5 inches length and 0.625 inches width for standard chain fitment
• Clearly marked not for lifting — helps maintain jobsite compliance

Compatibility

Designed for use with 3/8-inch diameter chain in non-lifting rigging and tie-down assemblies. Compatible with standard chain grades and hooks that accept a 3/8-inch connecting link.

Installation Notes

Cold shut links are installed using a hammer and punch to close the open end of the link once it is seated on the chain — power down any load and ensure zero tension on the chain before installation or removal. Do not use this link in overhead lifting, hoisting, or any vertical load application. Inspect the link for deformation, cracking, or corrosion before each use and replace if any damage is found. Follow applicable ASME and OSHA rigging standards for non-lifting chain hardware on commercial jobsites.