Camden Door Controls CX-MA1214-25D Spacer Plate 1 Inch

Product Description

The Camden Door Controls CX-MA1214-25D is a 1-inch spacer plate designed for use with 1200-pound magnetic locks. Spacer plates are used to create the necessary offset between a door frame and a magnetic lock body, ensuring proper surface contact between the lock and its armature plate. This hardware is typically installed by commercial door and access control technicians as part of a complete electromagnetic locking system. The plate accommodates installations where direct mounting is not feasible due to door frame geometry or door swing clearance requirements.

This spacer plate is suited for commercial access control installations where a 1200-pound electromagnetic lock requires a 1-inch standoff from the mounting surface. Common applications include aluminum storefront frames, hollow metal doors, and similar commercial door assemblies where frame depth or door thickness creates a gap that must be bridged for the lock armature to seat flush and achieve full holding force. Installation is typically performed by a licensed electrician or certified access control technician.

Key Features

• 1-inch standoff depth for proper magnetic lock armature alignment
• Rated for use with 1200-pound magnetic locks
• Sold individually as a single unit
• Part of the Camden Door Controls magnetic lock accessory line for exit device and access control systems

Compatibility

Designed as an OEM-style accessory spacer plate for 1200-pound electromagnetic lock installations requiring a 1-inch offset at the mounting surface.

Installation Notes

Installation should be performed by a licensed electrician or qualified access control technician familiar with low-voltage door hardware systems. Disconnect and de-energize the magnetic lock and any connected access control power supply before beginning work. Verify that the spacer plate is fully seated and that all fasteners are secured before restoring power to the locking system. Follow applicable local building codes and NFPA 101 life safety requirements for egress hardware when integrating electromagnetic locks into door assemblies.