Bullard 20LCL CC20 Respirator Hoods 25 Pack

Product Description

The BULLARD 20LCL is a pack of 25 replacement respirator hoods designed for use with the CC20 series of supplied-air and powered air-purifying respirator systems. Each hood provides a full-head covering interface that connects to the supporting headgear assembly, maintaining the sealed environment required for respiratory protection in contaminated or low-oxygen atmospheres. This accessory is intended for use by industrial hygienists, confined-space entry teams, hazmat responders, and any trade professional operating in environments that require continuous positive-pressure respiratory protection. The package quantity of 25 makes it practical for facility safety programs that rotate or replace hoods on a scheduled maintenance cycle.

The BULLARD 20LCL hoods are used in industrial, manufacturing, and emergency response settings where CC20-compatible supplied-air or PAPR systems are deployed. They are appropriate for environments with airborne particulates, chemical vapors, or oxygen-deficient conditions. The hoods are designed as direct accessories for systems using 20TJN, 20TICN, and 20TICH headgear assemblies, and are typically stocked by safety equipment distributors and used by trained personnel qualified to work in atmosphere-supplying respirator programs.

Key Features

• Designed specifically for the CC20 respirator series headgear assemblies
• Compatible with 20TJN, 20TICN, and 20TICH series units
• Packaged in quantities of 25 to support program-level replacement cycles
• Lightweight construction at 0.5 pounds per package
• Minimum order quantity of 1 package for flexible procurement

Compatibility

Designed for use with BULLARD CC20 series respirator assemblies, specifically the 20TJN, 20TICN, and 20TICH headgear models. Consult the system documentation or BULLARD technical resources to confirm fitment before installation.

Installation Notes

Hood replacement should be performed by a qualified respirator program administrator or trained safety professional following the employer respiratory protection program in accordance with OSHA 29 CFR 1910.134. Ensure the blower unit or supplied-air source is fully powered down and depressurized before removing or attaching hood components. Inspect the hood seating and connection interface for damage or contamination prior to returning the unit to service. Follow the manufacturer service manual for proper attachment sequence to maintain the integrity of the respiratory seal.