Bsc Preferred XO18-QT X-o Rust Satin Black Enamel Paint

Product Description

The BSC PREFERRED XO18-QT is a satin black, oil-based anti-rust enamel formulated for both interior and exterior use. It delivers a hard, corrosion-resistant finish on metal surfaces where rust prevention and durable appearance are required. The formula carries a VOC content of less than 400 grams per litre, keeping it within widely accepted regulatory thresholds for professional use. This one-quart unit is packaged for job-site or shop use and is suited for fleet maintenance, equipment refinishing, and structural metal coating by maintenance technicians and trade professionals who need a reliable, single-coat rust-inhibiting finish.

This enamel is designed for application on ferrous and non-ferrous metal surfaces in both indoor and outdoor environments. Typical use cases include coating shop equipment, tools, metal fixtures, vehicle components, and structural steel. The oil-base formulation provides good adhesion over properly prepared bare metal and previously painted surfaces. It is commonly specified in fleet and vehicle maintenance programs where rust protection and a clean satin finish are both priorities.

Key Features

• Oil-base formula provides strong adhesion and a durable, corrosion-resistant film
• Satin black finish suitable for both interior and exterior applications
• VOC content less than 400 grams per litre for compliance with common VOC regulations
• Anti-rust enamel formulation inhibits oxidation on bare and prepared metal surfaces
• One-quart unit size appropriate for targeted touch-up or small-area coating work

Compatibility

Designed as an oil-base anti-rust enamel for use on ferrous and non-ferrous metal surfaces in interior and exterior environments. Suitable for properly cleaned and prepared bare metal, primed surfaces, and sound previously painted metal.

Installation Notes

Surface preparation is critical before application — remove loose rust, grease, and contaminants by sanding, wire brushing, or chemical cleaning. Apply in accordance with the product label for spread rate and recoat intervals. Consult local regulations regarding VOC-compliant coatings before use in regulated jurisdictions. Use appropriate PPE including gloves and eye protection, and ensure adequate ventilation when applying oil-base coatings in enclosed spaces.