Bsc Preferred STCR3322L4 Double Bowl Drop-in Kitchen Sink

Product Description

The BSC PREFERRED STCR3322L4 is a double bowl drop-in kitchen sink constructed from 20-gauge Type 304 stainless steel. It measures 33 inches x 22 inches x 10.25 inches and features two equal-sized rectangular bowls, with one bowl at extra depth to handle large pots, pans, and stacked dishware. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. The center drain placement on each bowl aligns with standard plumbing rough-in locations, and the 3.5-inch drain opening accommodates common basket strainers. This sink is installed by licensed plumbers in residential kitchen remodel and new-construction applications.

The STCR3322L4 is suited for residential kitchen countertop installations where a drop-in configuration is specified. The U-channel mounting system positions clips inside the channel to simplify seating the sink against the countertop deck. A minimum cabinet width of 36 inches is required. The sink ships with all necessary mounting hardware and is compatible with countertops up to 0.75 inches thick. It is manufactured in the USA and carries the BSC PREFERRED brand, which has produced stainless steel kitchen products since 1920.

Key Features

• 20-gauge Type 304 stainless steel construction for corrosion resistance and durability
• Two equal rectangular bowls, one extra deep, for versatile prep and washing tasks
• Sound-deadening pads minimize vibration and operational noise
• U-channel mounting design simplifies drop-in installation with clips seated inside the channel
• 3.5-inch drain opening accommodates standard basket strainer assemblies
• Includes all mounting hardware for countertops up to 0.75 inches thick

Compatibility

Designed as a drop-in replacement or new-install sink for residential kitchen countertop cutouts requiring a 33-inch x 22-inch double bowl configuration with a minimum 36-inch base cabinet.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and disconnect existing drain and supply lines before removing an existing sink. Apply a continuous bead of silicone sealant around the countertop cutout perimeter before dropping the sink into place, then tighten mounting clips evenly to avoid warping the rim. Do not overtighten clips on composite or laminate countertops, as this can crack the substrate.