Bsc Preferred STCR3322L3 Drop-in Dual Bowl Kitchen Sink

Product Description

The BSC PREFERRED STCR3322L3 is a drop-in, dual-bowl stainless steel kitchen sink designed for residential installations. It measures 33 inches x 22 inches x 10.25 inches overall and is fabricated from 20-gauge Type 304 stainless steel. The two bowls are divided by depth: one bowl runs 10 inches deep for soaking, stacking dishes, or filling large pots, while the second bowl measures 7 inches deep for food prep and drying tasks. A center drain opening of 3.5 inches promotes efficient drainage. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. Licensed plumbers and skilled tradespeople handle typical installation on countertop cutouts in cabinet openings of 36 inches minimum width.

This sink is suited for residential kitchen applications where a drop-in configuration is required. The three-hole faucet deck accommodates standard faucet and accessory setups. The U-channel mounting system includes pre-installed clips inside the channel, reducing the need for extensive work underneath the counter. At 13.1 pounds net weight, the unit is manageable during single-trade installation. The stainless steel finish resists scratches and stains under normal kitchen conditions. This sink is manufactured in the USA.

Key Features

• Dual-bowl layout: 10-inch deep bowl for soaking and a 7-inch deep bowl for prep and drying
• 20-gauge Type 304 stainless steel construction for corrosion resistance and durability
• Sound-deadening pads bonded to the underside reduce noise and vibration
• U-channel drop-in mounting system with pre-installed clips simplifies countertop installation
• Three-hole faucet deck supports standard faucet and accessory configurations
• 3.5-inch center drain opening for efficient drainage
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for residential kitchen countertops requiring a minimum cabinet width of 36 inches and a standard drop-in cutout.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Power down any garbage disposal units and shut off the water supply at the stop valves before removing an existing sink. Apply a continuous bead of silicone sealant around the underside rim flange before setting the sink into the cutout, then secure using the pre-installed mounting clips from below. Do not overtighten mounting clips, as this can deform the sink rim or crack the countertop substrate.