Bsc Preferred QJDIB-DB-052 Titanium Hex Drill Bit 3/16

Product Description

The BSC PREFERRED QJDIB-DB-052 is a 3/16-inch impact-ready titanium hex shank drill bit built for fast, accurate drilling across a wide range of materials. A titanium coating reduces heat build-up during use, extending bit life and maintaining cutting edge sharpness. The 135-degree split point tip provides a precision start without walking, eliminating the need for a center punch on most surfaces. A reinforced core adds resistance to breakage under the higher torque demands of impact drivers. The 1/4-inch hex shank seats quickly in standard drill chucks and impact driver collets without additional adapters.

This bit is suited for use in residential and light commercial trade applications where fast bit changes and impact driver compatibility are priorities. HVAC technicians, electricians, plumbers, and general contractors commonly use impact-ready hex shank bits when running fasteners or drilling pilot holes through sheet metal, wood, and light-gauge steel. The titanium coating makes the bit a practical everyday consumable for high-frequency drilling tasks on the job site.

Key Features

• Titanium coating reduces heat build-up and extends cutting edge life
• 135-degree split point tip starts on contact with no walking
• Reinforced core resists breakage under impact driver torque
• 1/4-inch hex shank compatible with standard drills and impact drivers
• 3/16-inch diameter for pilot holes and general drilling in varied materials

Compatibility

Designed for use with any drill or impact driver equipped with a standard 1/4-inch hex collet or chuck. Suitable for drilling into wood, sheet metal, and similar materials common in trade applications.

Installation Notes

This bit is installed and removed by hand in any 1/4-inch hex collet — no tools required. Confirm the driver or drill is powered off and the battery is disconnected or the tool is unplugged before changing bits. Use appropriate speed settings for the material being drilled; excessive speed on hard materials can reduce bit life even with a titanium coating. Discard bits that show visible tip damage or deformation to avoid workpiece damage or breakage during use.