Bsc Preferred PSR25222 Drop-in Kitchen Sink 25x22

Product Description

The BSC PREFERRED PSR25222 is a drop-in single bowl kitchen sink constructed from 20-gauge Type 304 stainless steel. It measures 25 inches long by 22 inches wide overall, with a rectangular bowl interior measuring 21 inches long by 15.75 inches wide and a depth of 7.5 inches. The sink ships with all hardware needed for countertop installations up to 0.75 inches thick and features a centered 3.5-inch drain opening for efficient drainage. Sound-deadening pads are bonded to the underside of the bowl to reduce vibration and noise during everyday use. This unit is manufactured in the USA and carries a net weight of 10.25 pounds.

The PSR25222 is suited for residential kitchen installations, including primary kitchen workstations, prep areas, and utility or laundry room applications. The drop-in design seats into a cut countertop opening and mounts via a U-channel system, eliminating the need for a separate mounting frame. A minimum cabinet width of 30 inches is required. The 7.5-inch bowl depth provides adequate clearance for soaking large cookware and stacking dishes.

Key Features

• 20-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Bowl interior: 21 inches long by 15.75 inches wide by 7.5 inches deep
• Drop-in installation with U-channel mounting system; all hardware included
• 3.5-inch centered drain opening for high-flow drainage
• Sound-deadening pads bonded to bowl underside to reduce operational noise and vibration
• Compatible with countertops up to 0.75 inches thick; requires minimum 30-inch base cabinet
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for residential kitchens, prep areas, and utility rooms with a minimum 30-inch base cabinet and countertops up to 0.75 inches thick.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with local plumbing codes and IPC guidelines. Shut off the water supply and disconnect the drain assembly before beginning any sink replacement work. Apply a continuous bead of plumber's putty or silicone sealant around the perimeter of the cutout before dropping the sink into position to ensure a watertight seal. Do not overtighten the mounting clips, as this can distort the rim or damage the countertop surface.