Bsc Preferred PSDKAD2517550 Drop-in Sink Ada 25x17

Product Description

The BSC PREFERRED PSDKAD2517550 is a single bowl drop-in sink constructed from 20-gauge Type 304 stainless steel and designed for ADA-compliant installations in educational and public facilities. It measures 25 inches long by 17 inches wide by 5.5 inches deep overall, with a bowl cavity of 16 inches by 13.5 inches. A center drain opening of 3.5 inches simplifies drainage. Sound-deadening pads are factory-applied to the underside of the bowl to reduce vibration and noise during use. The unit ships without a faucet package, focusing on the sink body as a standalone replacement or new-construction component. Licensed plumbers and facilities maintenance staff are the primary installers for this type of fixture.

This sink is suited for classroom washrooms, school restrooms, and similar light-to-moderate commercial or institutional plumbing applications where ADA accessibility is required. The U-channel rim design includes pre-installed mounting clips, allowing the sink to drop into a standard countertop cutout. A cutout template is included to guide countertop modifications. The minimum cabinet or vanity width required for installation is 30 inches, making it compatible with standard base cabinet configurations found in school and public-facility buildouts.

Key Features

• 20-gauge Type 304 stainless steel construction for corrosion resistance and durability
• ADA-compliant when properly installed, meeting accessibility requirements for public and educational settings
• Center drain placement at 3.5 inches diameter for direct, clean drainage
• Sound-deadening pads on the bowl underside reduce operational noise and vibration
• U-channel drop-in rim with pre-installed mounting clips for simplified countertop installation
• Includes cutout template for accurate countertop preparation
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for standard 30-inch minimum base cabinets in classroom, school, and public-facility plumbing applications where ADA compliance is required.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and ADA Standards for Accessible Design. Shut off the water supply and verify countertop substrate integrity before cutting. Use the included template to mark the cutout, and apply a continuous bead of approved silicone sealant around the rim perimeter before seating the sink. Tighten mounting clips evenly from below to secure the U-channel rim without distorting the countertop surface.