Bsc Preferred LZWSGRNM8K In-wall Bottle Filling Station

Product Description

The BSC PREFERRED LZWSGRNM8K is a touchless in-wall bottle filling station designed for commercial and institutional indoor environments. It delivers filtered, chilled drinking water through a hermetically sealed refrigeration system at a rate of 8.0 gallons per hour, with a rapid fill rate of 1.1 gallons per minute. The unit mounts flush within the wall and ships with a mounting frame and filter included. A 3,000-gallon NSF-certified filter reduces lead and other contaminants, making this station suitable for facilities where water quality and sanitation are critical priorities. Licensed plumbers handle the rough-in and final connection work.

This station is intended for high-traffic indoor installations including schools, gyms, office buildings, and similar commercial facilities. Its laminar flow spout reduces splashing during fill cycles, and a real drain system eliminates standing water in the basin to maintain sanitary conditions. The Green Ticker display tracks the cumulative number of single-use plastic bottles displaced, providing a visible sustainability metric for building operators and occupants. Antimicrobial surface protection inhibits mold and mildew growth between service intervals.

Key Features

• Touchless sensor activation for hands-free, hygienic operation
• 1.1 gallon per minute fill rate with 8.0 gallons per hour chilled output
• 3,000-gallon NSF-certified filter for lead and contaminant reduction
• Hermetically sealed refrigeration system for consistent chilled water delivery
• Laminar flow spout minimizes splashing and keeps the fill area clean
• Green Ticker tracks cumulative plastic bottles saved from waste
• Antimicrobial protection on key components to inhibit mold and mildew

Compatibility

Designed for in-wall recessed installation in commercial and institutional indoor environments. Mounting frame and filter are included to support a complete installation.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC requirements. Shut off the water supply and verify the rough-in opening dimensions against the unit specifications before beginning work. The unit requires a recessed wall cavity of sufficient depth to accept the mounting frame. Do not overtighten supply connections or modify the factory-sealed refrigeration circuit.