Bsc Preferred LRS33222 Drop-in Kitchen Sink 33 Inch

Product Description

The BSC PREFERRED LRS33222 is an 18-gauge Type 304 stainless steel drop-in kitchen sink built for residential kitchens, prep areas, and laundry rooms. The single-bowl configuration measures 28 inches in length, 16 inches in width, and 7.5 inches in depth, providing a generous basin for soaking, washing, and stacking. A U-channel rim design positions mounting clips inside the channel, reducing the time a plumber or installer spends working underneath the sink. Bottom-only sound-deadening pads are factory-applied to reduce vibration and noise during use. The scratch-resistant lustrous finish is engineered so that light surface marks blend into the grain over time.

This sink is suited for residential kitchen installations and residential prep or utility spaces where a drop-in configuration is required. The 3.5-inch center drain opening aligns with standard basket strainer assemblies, simplifying rough-in plumbing. Two pre-drilled faucet holes accommodate most standard deck-mount faucet configurations. A minimum cabinet width of 36 inches is required for proper installation. The sink ships as a single unit and is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• U-channel mounting system allows clip positioning from above, reducing under-sink labor time
• Bottom-only sound-deadening pads minimize basin noise and vibration
• 3.5-inch center drain opening fits standard basket strainer assemblies
• Two pre-drilled faucet holes for deck-mount faucet installation
• Manufactured in the USA

Compatibility

Designed for drop-in installation in residential kitchen and prep sink cabinetry with a minimum cabinet width of 36 inches. Compatible with standard 3.5-inch basket strainer drains and deck-mount faucets.

Installation Notes

Installation is performed by a licensed plumber or experienced installer following local IPC requirements. Shut off the water supply and verify the cabinet opening dimensions before setting the sink. Apply a continuous bead of silicone sealant around the underside of the rim before lowering the sink into the countertop cutout, then secure mounting clips per the manufacturer instructions. Do not overtighten mounting clips, as this can distort the rim channel or damage the countertop substrate.