Bsc Preferred LRQ33193 Double Bowl Drop-in Kitchen Sink

Product Description

The BSC PREFERRED LRQ33193 is an 18-gauge Type 304 stainless steel double-bowl drop-in kitchen sink designed for residential kitchen installations. Each of the two equal bowls measures 14 inches by 14 inches with a 7.5-inch depth, providing substantial working space for washing, soaking, and rinsing simultaneously. The sink is fabricated with straight sidewalls and a flat bottom to maximize usable bowl volume and simplify cleanup. Sound-deadening pads are bonded to the underside to reduce vibration and water noise. The Quick-Clip mounting system allows secure drop-in installation from above the countertop without under-counter access during fitting. The unit ships at 18 pounds and is made in the USA.

This sink is intended for residential kitchen countertop installations requiring a 36-inch minimum base cabinet. The countertop cutout dimensions are 32-3/8 inches by 18-7/8 inches. The overall sink dimensions are approximately 33 inches in length by 19.5 inches in width by 7.625 inches in depth. Three pre-drilled faucet holes allow flexible faucet and accessory configurations. Plumbers and experienced DIYers handling kitchen fixture replacements or new construction rough-ins are the primary installers.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and durability
• Two equal bowls, each 14 inches by 14 inches with 7.5-inch depth
• Flat bottom and straight sidewalls maximize usable bowl space
• Sound-deadening pads bonded to underside reduce vibration and noise
• Quick-Clip mounting system enables drop-in installation from above the countertop
• Three faucet holes for flexible faucet and accessory configurations
• Made in the USA

Compatibility

Designed for drop-in installation in countertops with a cutout of 32-3/8 inches by 18-7/8 inches, requiring a minimum 36-inch base cabinet width. Compatible with standard 3-hole faucet configurations.

Installation Notes

Installation is performed by a licensed plumber or qualified tradesperson following local plumbing code requirements. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. Apply a continuous bead of silicone sealant around the cutout perimeter before seating the sink, then secure with the provided Quick-Clip fasteners from above. Do not overtighten the mounting clips, as this can distort the sink flange or damage the countertop surface.