Bsc Preferred LRADQ2521603 Drop-in Sink 18-gauge Stainless

Product Description

The BSC PREFERRED LRADQ2521603 is an ADA-compliant single bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 25 inches long by 21.25 inches wide by 6 inches deep overall, with a rectangular bowl interior of 21 inches by 15.75 inches and a bowl depth of 5.875 inches. The rear center drain placement uses a 3.5-inch drain opening, maximizing usable bowl space and cabinet clearance below. Bottom-only sound deadening pads reduce noise during use. A licensed plumber or experienced remodeler typically handles this installation. The Quick-Clip Mounting System allows top-down securing from above the countertop without requiring access from below during the clamping phase.

This sink is suited for residential kitchen installations, including new construction and remodels. It fits countertop cutouts supported by a minimum 30-inch base cabinet. The three-hole faucet configuration accommodates a wide range of standard deck-mount faucet setups, including single-handle, two-handle, and side-spray configurations. The scratch-resistant stainless steel surface and rear drain placement make it practical for high-use household kitchens where accommodating large cookware is a priority. Manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction with scratch-resistant lustrous grain finish
• ADA-compliant design suitable for accessible kitchen installations
• Quick-Clip Mounting System enables top-down installation without under-counter access during clamping
• Rear center 3.5-inch drain placement maximizes bowl usability and under-sink cabinet space
• Bottom-only sound deadening pads reduce basin noise during everyday use
• Three-hole faucet configuration supports versatile faucet and side-spray setups

Compatibility

Designed for drop-in installation in countertops supported by a minimum 30-inch base cabinet. Compatible with standard 3.5-inch kitchen drain assemblies. Accepts three-hole deck-mount faucet configurations.

Installation Notes

Installation is typically performed by a licensed plumber in compliance with applicable local plumbing codes. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. Follow the Quick-Clip Mounting System instructions carefully to achieve a proper seal between the sink rim and countertop surface. Apply plumber's putty or silicone sealant per the manufacturer's guidance around the drain flange and sink perimeter to prevent leaks.