Bsc Preferred LRADQ2222500 Drop-in Kitchen Sink 22in

Product Description

The BSC PREFERRED LRADQ2222500 is an 18-gauge Type 304 stainless steel single bowl drop-in kitchen sink designed for residential kitchen installations. Measuring 22 inches by 22 inches with a bowl depth of approximately 5 inches, it provides a generous wash basin suitable for daily dishwashing, rinsing, and food prep tasks. A rear center drain placement opens up usable cabinet space directly below. Sound-deadening pads are applied to the underside to reduce vibration and water noise during use. The ADA-compliant design meets accessibility requirements when installed per applicable guidelines. Licensed plumbers and experienced contractors are the typical installers for this fixture.

This sink suits residential kitchens requiring a drop-in installation into countertops with a cutout supported by a minimum 27-inch base cabinet. The Quick-Clip mounting system allows the sink to be secured from above the countertop without requiring access from below, which simplifies installation in tight cabinet configurations. The sink arrives without pre-drilled faucet holes, keeping the deck clean for custom faucet placement or a faucet-free setup. It is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Rear center drain positioning maximizes usable under-sink cabinet space
• Quick-Clip mounting system allows above-counter installation without under-cabinet access
• Sound-deadening pads reduce water noise and vibration during use
• ADA-compliant when installed per applicable code requirements
• No pre-drilled faucet holes for a clean deck profile

Compatibility

Designed as a drop-in replacement or new-install single bowl kitchen sink for countertop cutouts supported by a minimum 27-inch base cabinet.

Installation Notes

Installation should be performed by a licensed plumber or qualified contractor in accordance with local plumbing codes and the International Plumbing Code where adopted. Shut off the water supply and disconnect existing drain and supply lines before beginning any sink replacement work. Apply a continuous bead of approved silicone sealant around the countertop cutout perimeter before setting the sink to ensure a watertight seal. Do not overtighten the Quick-Clip fasteners, as excessive force can distort the sink flange or damage the countertop material.