Bsc Preferred LRADQ2022503 Drop-in Kitchen Sink

Product Description

The BSC PREFERRED LRADQ2022503 is an 18-gauge Type 304 stainless steel drop-in kitchen sink designed for residential kitchens, bars, and laundry installations. The single square bowl measures 16 x 16 inches with a depth of approximately 5 inches, providing ample room for washing and stacking dishes. Overall dimensions are 19.5 x 22 inches with a 5-inch depth. The rear center drain placement is 3.5 inches and keeps the drain out of the primary work area of the bowl. Large sound-deadening pads are bonded to the underside to reduce water and impact noise during use. Installed by plumbers or experienced tradespeople, this sink ships at 14.5 pounds.

This sink is suited for drop-in installation in residential kitchen countertops, wet bars, or laundry areas. It requires a minimum cabinet width of 24 inches. The three-hole faucet configuration accommodates a wide range of deck-mount faucet styles. The ADA-compliant bowl depth and dimensions make it appropriate for accessible kitchen designs. The Quick-Clip mounting system allows the sink to be secured from above the counter, which is useful in retrofit situations where under-counter access is limited.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion and dent resistance
• Quick-Clip above-counter mounting system simplifies drop-in installation
• Sound-deadening pads bonded to the underside reduce operational noise
• ADA-compliant single bowl design suitable for accessible installations
• 3.5-inch rear center drain placement maximizes usable bowl space
• Three-hole faucet deck configuration supports a variety of faucet styles
• Made in the USA

Compatibility

Designed for drop-in installation in countertops with a minimum cabinet width of 24 inches. Compatible with standard 3.5-inch kitchen drain assemblies and three-hole deck-mount faucet configurations.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with local plumbing codes and IPC guidelines. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. Apply a continuous bead of plumber's putty or silicone sealant around the mounting flange before setting the sink into the cutout, then secure with the provided Quick-Clip fasteners from above. Do not overtighten clips, as this can distort the sink flange against the countertop surface.