Bsc Preferred LRADQ191865MR2 Drop-in Kitchen Sink

Product Description

The BSC PREFERRED LRADQ191865MR2 is an 18-gauge Type 304 stainless steel drop-in kitchen sink designed for residential kitchen installations. It features a single rectangular bowl with overall dimensions of 19 inches in length by 18 inches in width and a depth of 6.5 inches. Internal bowl dimensions measure 16 inches in length by 11.5 inches in width, providing ample workspace for washing and stacking dishes. The offset rear drain placement maximizes usable bowl space and keeps under-counter plumbing clear of the work zone. ADA-compliant design allows this sink to meet accessibility requirements when installed to applicable standards. Licensed plumbers and skilled tradespeople are the typical installers for this fixture.

This sink is suited for residential kitchen countertop installations where a drop-in single-bowl configuration is required. The quick-clip mounting system allows the sink to be set and secured from above the countertop, which is well suited to retrofit and remodel applications where under-counter access may be limited. The offset rear drain frees up usable space in the bowl and reduces P-trap interference below the deck. Sound-dampening pads bonded to the underside of the bowl reduce vibration and noise during water flow and dish handling. The sink weighs 10.4 pounds and ships in packaging measuring approximately 19.31 inches by 9.31 inches by 24.94 inches.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and durability
• Single rectangular bowl with 16-inch by 11.5-inch internal dimensions and 6.5-inch depth
• Quick-clip mounting system enables above-countertop installation without under-counter access
• Offset rear drain maximizes bowl usable space and simplifies under-counter rough-in
• Sound-dampening pads bonded to the bowl underside reduce operational noise
• ADA-compliant design when installed per applicable accessibility standards
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-installation single-bowl kitchen sink for standard countertop cutouts sized to accept a 19-inch by 18-inch rim. Confirm countertop cutout dimensions and deck thickness against manufacturer installation specifications before ordering.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. Apply a continuous bead of plumber's putty or silicone sealant around the rim perimeter before setting the sink into the cutout, then secure with the provided quick-clip fasteners. Verify drain alignment with the existing or planned P-trap rough-in before final tightening.