Bsc Preferred LRADQ1720501 Drop-in Kitchen Sink 17x20

Product Description

The BSC PREFERRED LRADQ1720501 is a single bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. The sink measures 17 inches by 20 inches overall, with a square interior bowl of 14 inches by 14 inches and a depth of 4.875 inches. A rear center drain placement keeps the usable basin area clear and allows more efficient use of the cabinet space below. Sound-deadening pads are bonded to the underside to reduce noise during normal use. ADA compliance is achieved when the sink is properly installed per applicable guidelines. The Quick-Clip mounting system allows above-counter installation, making it well-suited for laminate countertop applications.

This sink fits residential kitchens, wet bars, and laundry utility areas. The countertop cut-out dimensions are 16-3/8 inches by 19-3/8 inches, requiring a minimum base cabinet width of 21 inches. One pre-configured faucet hole accommodates a standard deck-mount faucet. The 3.5-inch drain opening accepts most standard basket strainer assemblies. Manufactured in the USA, this sink is intended for installation by a licensed plumber or qualified tradesperson in new construction or remodel settings.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• ADA compliant when properly installed per applicable access requirements
• Quick-Clip above-counter mounting system compatible with laminate countertops
• Rear center drain placement maximizes in-bowl workspace and under-sink cabinet clearance
• Sound-deadening pads bonded to underside reduce operational noise
• Single faucet hole configuration for simplified fixture selection

Compatibility

Designed for drop-in installation in countertops with a 16-3/8-inch by 19-3/8-inch cut-out opening and a minimum base cabinet width of 21 inches. The 3.5-inch drain opening is compatible with standard basket strainer assemblies common to residential and light-commercial plumbing applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and IPC requirements. Shut off the water supply and disconnect any existing drain and supply lines before beginning work. Apply a continuous bead of plumber's putty or silicone sealant around the cut-out perimeter before seating the sink, then secure with the included Quick-Clip fasteners from above the counter. Do not overtighten the mounting clips, as this may distort the sink flange or damage the countertop surface.