Bsc Preferred LRAD332265MR2 Double Bowl Drop-in Sink

Product Description

The BSC PREFERRED LRAD332265MR2 is an ADA-compliant, drop-in double bowl kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 33 inches in length by 22 inches in width, with each of the two equal bowls measuring 13.5 inches long by 16 inches wide at a depth of 6.125 inches. The Lustertone grain finish resists everyday scratches and blends minor surface marks over time. Rear-centered drain placement keeps plumbing connections toward the back of the cabinet, maximizing usable under-sink storage. This sink is intended for installation by licensed plumbers in residential and light commercial kitchen applications.

The LRAD332265MR2 is suited for residential kitchens requiring an ADA-compliant sink solution. The drop-in configuration fits into standard countertop cutouts and requires a minimum cabinet width of 36 inches. The countertop cutout dimension is 32-3/8 inches by 21-3/8 inches. The MR2 faucet hole configuration provides two pre-drilled openings to accommodate a standard two-handle faucet setup. Each bowl accepts a 3.5-inch drain basket. The U-channel installation method reduces mounting complexity and speeds up the rough-in process. This sink is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for long-term corrosion resistance
• Two equal-sized bowls, each 13.5 inches x 16 inches x 6.125 inches deep
• ADA-compliant drop-in design; requires minimum 36-inch cabinet
• Rear-centered drain placement maximizes under-sink cabinet space
• Sound-deadening pads included to reduce basin noise during use
• MR2 faucet hole configuration with two 3.5-inch drain openings
• Lustertone grain finish blends minor surface scratches over time

Compatibility

Designed as an OEM-style drop-in replacement or new-installation sink for standard 36-inch base cabinets with a countertop cutout of 32-3/8 inches by 21-3/8 inches. Compatible with standard 3.5-inch drain basket assemblies and typical two-handle faucet configurations using the MR2 hole layout.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC requirements. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. Drop-in mounting uses the U-channel method; verify countertop material compatibility and apply a continuous bead of silicone sealant around the perimeter of the cutout before seating the sink. Do not overtighten mounting clips, as this can distort the sink rim or damage the countertop material.