Bsc Preferred LRAD3321501 Drop-in Double Bowl Sink 33in

Product Description

The BSC PREFERRED LRAD3321501 is an 18-gauge Type 304 stainless steel drop-in double bowl kitchen sink designed for residential and light commercial installations. Measuring 33 inches x 21.25 inches x 5 inches, it features two equal bowls with rear center drain placement in each bowl, which maximizes usable cabinet space below. The Lustertone Classic brushed finish resists visible scratching under normal daily use and can be restored with a standard stainless steel restoration kit for deeper marks. Sound-deadening pads are applied to the underside to reduce water flow and impact noise during use. Licensed plumbers and skilled tradespeople handle this installation type.

This sink suits residential kitchens, wet bars, laundry rooms, and light commercial prep areas requiring a dual-bowl configuration. The drop-in design uses a U-channel frame with pre-installed mounting clips, allowing fit into a standard 36-inch minimum cabinet opening. The countertop cutout dimensions are 32.375 inches x 20.625 inches, accommodating countertops up to 0.75 inches thick. A single-hole faucet configuration is required. When installed per manufacturer guidelines, the sink meets ADA compliance requirements. Each bowl measures 13.5 inches in length and 16 inches in width, providing simultaneous workspace for washing and rinsing tasks.

Key Features

• 18-gauge Type 304 stainless steel construction for long-term corrosion resistance
• Lustertone Classic finish blends minor surface scratches into the overall grain pattern
• Rear center drain placement in both bowls optimizes under-sink storage and plumbing clearance
• Sound-deadening undercoating pads reduce water flow and dish clatter noise
• Pre-installed U-channel mounting clips allow faster drop-in installation
• ADA compliant when installed according to applicable guidelines
• Made in the USA

Compatibility

Designed for drop-in installation in countertops up to 0.75 inches thick with a cutout of 32.375 inches x 20.625 inches. Requires a minimum 36-inch base cabinet opening. Accepts a single-hole faucet configuration.

Installation Notes

Installation is performed by a licensed plumber in accordance with the applicable International Plumbing Code (IPC) requirements. Power off any in-cabinet electrical circuits and shut off water supply lines before beginning work. Apply a continuous bead of silicone sealant around the sink perimeter before setting it into the cutout to prevent water infiltration. Secure the pre-installed mounting clips evenly from below to achieve a flush, leak-free seat against the countertop surface.