Bsc Preferred LRAD3319601 Drop-in Kitchen Sink Double Bowl

Product Description

The BSC PREFERRED LRAD3319601 is an 18-gauge Type 304 stainless steel drop-in kitchen sink with two equal-sized square bowls. Each bowl measures 14 x 14 x 5.875 inches with rear-centered drains. The overall sink dimensions are 33 x 19.5 x 6 inches. Sound-deadening pads reduce operational noise during heavy use. The finish features a uniform grain pattern that resists everyday scratching, and minor deeper scratches can be repaired without replacing the unit. This sink is installed by licensed plumbers in residential kitchen applications and is manufactured in the USA.

The LRAD3319601 is suited for residential kitchen installations where a double-bowl configuration supports simultaneous washing, soaking, rinsing, and drying. The drop-in design fits into standard countertop openings using a U-channel mounting method, with clips positioned inside the channel prior to installation. A minimum cabinet size of 36 inches is required. The countertop cutout dimensions are 32.375 x 18.875 inches. When installed in compliance with applicable accessibility guidelines, this sink meets ADA requirements.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and structural integrity
• Two equal square bowls, each 14 x 14 x 5.875 inches, with rear-centered drains
• Sound-deadening pad system reduces noise from water flow and impact
• Drop-in installation with U-channel mounting clips for straightforward countertop fit
• Scratch-resistant finish; minor deeper scratches are repairable
• ADA compliant when installed per applicable accessibility standards
• Made in the USA

Compatibility

Designed for drop-in installation in residential kitchen countertops requiring a minimum cabinet width of 36 inches and a countertop cutout of 32.375 x 18.875 inches.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and disconnect existing drain lines before removing an existing sink. Position mounting clips inside the U-channel before lowering the sink into the cutout, and apply a continuous bead of approved sealant around the sink perimeter to prevent water intrusion. Verify ADA-compliant clearances after installation if accessibility compliance is required.