Bsc Preferred LRAD2922650 Double Bowl Drop-in Sink

Product Description

The BSC PREFERRED LRAD2922650 is an ADA-compliant, double bowl drop-in kitchen sink fabricated from 18-gauge Type 304 stainless steel. Each bowl measures 11.5 inches by 16 inches with a depth of 6.375 inches, providing ample capacity for washing, soaking, and rinsing. A rear center drain placement maximizes usable bowl floor space and cabinet clearance below. Sound-deadening pads are bonded to the underside to reduce noise and vibration during use. The scratch-resistant finish is designed to allow minor surface marks to blend naturally, maintaining appearance under daily heavy-duty conditions. Overall sink dimensions are 29 inches by 22 inches by 6.5 inches. Installed by licensed plumbers, this sink is made in the USA.

The LRAD2922650 is suited for residential kitchen installations where ADA compliance is required or preferred. The drop-in configuration allows installation into standard countertop cutouts without specialized tooling. The U-channel mounting method and included hardware support a straightforward countertop integration. Rear center drain positioning keeps the drain out of the primary work zone of each bowl, which is useful in both remodel and new-construction kitchen applications. The sink weighs 17 pounds, making single-technician handling practical during rough-in and countertop set.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and structural rigidity
• ADA-compliant design when installed per applicable requirements
• Rear center drain placement maximizes usable bowl floor area and under-cabinet space
• Sound-deadening pads bonded to basin underside to reduce operational noise and vibration
• Drop-in installation with U-channel mounting method and included hardware
• Scratch-resistant finish designed to maintain appearance under heavy-duty daily use
• Manufactured in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for standard residential kitchen countertop cutouts requiring a 29-inch by 22-inch double bowl configuration.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC standards. Shut off the water supply and disconnect existing drain and supply lines before beginning any countertop work. Apply a continuous bead of plumber's putty or silicone sealant around the sink perimeter per the manufacturer's instructions before setting the sink into the cutout. Verify ADA mounting height requirements at the rough-in stage if accessibility compliance is required for the project.