Bsc Preferred LRAD2922504 Double Bowl Kitchen Sink

Product Description

The BSC PREFERRED LRAD2922504 is an 18-gauge Type 304 stainless steel double-bowl drop-in kitchen sink measuring 29 x 22 x 5 inches. It features two equal rectangular bowls, each 11.50 x 16 inches, with rear center drains that maximize usable bowl area. The lustrous satin finish is scratch-resistant and suited to heavy daily use. Sound-deadening pads bonded to the underside reduce noise from water impact and dishware contact. Licensed plumbers and kitchen installers are the typical trade professionals who fit this unit into residential or light commercial kitchen applications.

The LRAD2922504 is designed for drop-in installation using a U-channel mounting system that seats the sink from above the countertop deck. This reduces time working underneath the cabinet and simplifies leveling. The sink requires a minimum cabinet width of 33 inches. Four pre-configured faucet holes provide flexibility in faucet selection and layout. The sink meets ADA requirements when installed to the appropriate countertop height and knee-clearance specifications, making it suitable for accessible kitchen builds and remodels.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Two equal bowls, each 11.50 x 16 inches, with rear center drain placement
• Drop-in installation with U-channel mounting system for above-deck fitting
• Sound-deadening pads reduce noise from water flow and dishware impact
• Four faucet holes for flexible faucet and accessory configuration
• ADA-compliant when installed to required height and clearance specifications
• Manufactured in the USA

Compatibility

Designed as an OEM-style drop-in replacement or new installation sink for residential and light commercial kitchens requiring a 33-inch minimum base cabinet and standard four-hole faucet configuration.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Power down any disposals and shut off the water supply before beginning work. Use approved silicone sealant around the sink perimeter to prevent water intrusion at the deck joint. Do not overtighten the U-channel mounting clips, as this can distort the sink rim or damage the countertop surface.