Bsc Preferred LRAD2918503 Double Bowl Drop-in Kitchen Sink

Product Description

The BSC PREFERRED LRAD2918503 is a double bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 29 inches by 18 inches overall, with two equal-sized basins each reaching a depth of 4.875 inches. The sink carries ADA-compliant status, making it suitable for accessible kitchen installations in residential and light commercial settings. Licensed plumbers and kitchen remodel contractors install this unit as a standard drop-in application. The 18-gauge steel construction resists denting and surface scratches under normal daily use, and the lustrous finish is designed to maintain its appearance over extended service life.

This sink is suited for residential kitchens requiring a dual-basin layout, including new construction and remodel projects. The equal-sized bowls support simultaneous tasks such as food prep, rinsing, and washing. Three faucet holes come pre-punched for standard deck-mount faucet configurations. A minimum cabinet width of 33 inches is required for installation. The U-channel mounting design allows clips to be installed from inside the channel, reducing the need for extended work in the cabinet below. The sink is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for durability and corrosion resistance
• Equal dual-basin layout at 29 x 18 inches overall with 4.875-inch bowl depth
• ADA-compliant design suitable for accessible residential and commercial kitchens
• Sound-deadening pads applied to the underside to reduce basin noise during use
• U-channel mounting system simplifies clip installation without full under-sink access
• Three pre-punched faucet holes accommodate standard deck-mount faucet sets

Compatibility

Designed as a drop-in replacement or new-install double bowl kitchen sink for standard cabinetry with a minimum 33-inch cabinet width.

Installation Notes

Installation of this drop-in sink is performed by a licensed plumber or qualified contractor. Shut off the water supply and disconnect existing drain and supply lines before removal of any existing sink. Verify cabinet dimensions meet the 33-inch minimum width requirement before ordering. Silicone sealant rated for kitchen sink applications should be applied along the sink lip perimeter per the manufacturer instructions included with the unit.