Bsc Preferred LRAD2522605 Drop-in Kitchen Sink Single Bowl

Product Description

The BSC PREFERRED LRAD2522605 is a drop-in stainless steel kitchen sink built for residential and light commercial installations. It features a single rectangular bowl measuring 25 inches x 22 inches x 6 inches, fabricated from 18-gauge Type 304 stainless steel for long-term corrosion resistance and structural rigidity. A rear center drain placement opens up usable basin depth and improves access to the cabinet below. Bottom-only sound-deadening pads reduce impact and water noise during use. The Lustertone surface finish is scratch-resistant and can be restored using a compatible restoration kit. This sink is ADA compliant when installed to specification and is manufactured in the USA.

The LRAD2522605 is suited for residential kitchen and utility room installations requiring a drop-in mount configuration. It accommodates up to five faucet holes, offering flexibility for single-handle, widespread, or side-spray faucet configurations. The U-channel mounting system pre-positions clips along the sink perimeter, reducing under-counter installation time. A minimum cabinet width of 30 inches is required. The counter cutout dimension is 24-3/8 inches x 21-3/8 inches, and the drain opening is 3-1/2 inches. Plumbers and remodeling contractors are the primary installers for this type of fixture.

Key Features

• 18-gauge Type 304 stainless steel construction for durability and corrosion resistance
• Single bowl design with 25 inches x 22 inches x 6 inches basin dimensions
• Rear center drain placement maximizes basin usability and cabinet clearance
• Bottom-only sound-deadening pads reduce operational noise
• U-channel mounting system with pre-positioned clips for faster drop-in installation
• ADA compliant when installed per applicable guidelines
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-install sink for residential kitchen and utility countertop applications requiring a 24-3/8 inches x 21-3/8 inches counter cutout and a minimum 30-inch base cabinet width.

Installation Notes

Installation is performed by a licensed plumber or qualified contractor. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. Verify counter cutout dimensions and cabinet width before beginning. Follow local IPC and applicable building codes for drain connection and faucet installation; apply plumber's putty or silicone sealant at the sink perimeter as required by countertop material.